Material:Â EPDMÂ rubber
Color:Â Blue, any other colour is availableÂ
Hardness (Shore A): 70 ±5 as standard or per request
Specific gravity: 1.2 to 1.35 g/cm³                 Â
Tensile strength:Â 10MPA
Temperature Range:  -40 °F – 248 °F (-40°C – 120°C)
Tolerance: RMA Standard Cross-sectional Tolerance E2,orper request
Â
Application:
1. Medium and small military electronic computer case and microwave waveguide system
2. Aviation, spaceflight, ships and other military shelter and military electronic equipment;
3. Electronic products (such as computer chassis, mobile phones), telecommunications, high-frequency control equipment;
4. Electric power, railways and other harsh environment of electronic equipment.
Colored co-extrusion is requested to match the equipment, seashore rubber customizes blue, red, grey, yellow, wihte and other color that client needs.Â
co-extrusion type including sponge and solid EPDM rubber, metal clips and solid EPDM rubber, PVC and EPDM sponge rubber and etc.
Metal Clips
By using either or wire carrier, the edge protection sections will cling well, without the use of splicing tape. However, the use of a steel carrier will have a higher clamping effect than a wire carrier.
Steel Wire Carrier
Double side Joint Belt Carrier
Single Top Joint belt Carrier
The disadvantage of a profile with an unbroken steel carrier is a restricted bending radius over the lateral blade. This can be solved by breaking the connecting bridges. However, a slightly uneven strand may develop if this is done. In most technical applications the apperance will be irrelveant.
The choice of either a steel or wire carrier largely depends on the application situation and the desired apperance. The wire carrier is galvanized, it could pass the test of oxidation.